Quick answer: The Audi A4 B8 tail light assembly from LCS Auto is a smoked replacement for 2013โ2016 vehicles with a flowing sequential turn-signal effect. The current product listing describes direct OEM-style fitment, an original-spec connector, no cutting or splicing, no coding for the listed application, and a 12-month warranty. Because rear lamps can vary by body style, market and original configuration, confirm your car and the exact contents of the set before ordering.
Why Choose a Smoked Audi A4 B8 Tail Light Assembly?
A tail light replacement can solve two needs at once: replacing a damaged or unreliable lamp and refreshing the rear appearance of the car. A smoked lens gives the 2013โ2016 Audi A4 B8 a darker, more performance-focused look while keeping the original body lines intact.
1. A Cleaner, Darker Rear Design
The smoked finish reduces the bright red appearance of the lamp when it is off. This works especially well with black, grey, white and other neutral paint colours. The result is a more integrated rear design without changing the bumper or boot lid.
2. Complete Assembly Replacement
Replacing the lamp as an assembly is useful when the original lens is cracked, the housing is damaged, condensation keeps returning, or internal light sections have failed. It also avoids mixing a new outer lens with worn internal parts.
3. Sequential Turn Signals
When the indicator is activated, the turn-signal light moves across the lamp in a flowing sequence instead of illuminating all at once. This animated effect gives the rear of the Audi A4 a more modern appearance and makes the intended direction easier for following traffic to notice.
4. Direct-Fit Installation
The current LCS Auto product page lists this unit as an OEM-style direct replacement with an original-spec connector. It states that cutting, splicing and coding are not required for the listed application. That makes it suitable for workshops, resellers and owners who want a straightforward replacement, provided the vehicle configuration is confirmed first.
Audi A4 B8 Fitment Checklist
Do not buy a rear lamp by model name alone. Use the following checks before confirming an order:
- Model year: This product is listed for Audi A4 B8 vehicles from 2013 through 2016.
- Body style: Confirm whether the car is a sedan or Avant. Rear lamp shapes and inner lamp sections can differ. Audi’s official parts catalogue also identifies body-specific rear lamp applications.
- Inner and outer sections: Confirm whether the order includes the boot-lid lamps, the quarter-panel lamps, or the complete left-and-right set.
- Original lighting configuration: Compare the connector, pin count and original lamp type with clear photos before shipment.
- Market specification: Check local requirements for indicator colour, rear fog-light position and smoked-lens approval.
- VIN and production date: Send the VIN, production date and photos of both original lamps to the supplier for a final fitment check.
For additional factory reference, Audi provides a VIN-based official owner’s manual search.
Smoked vs Standard Red Tail Lights
| Factor | Smoked Assembly | Standard Red Assembly |
|---|---|---|
| Appearance when off | Darker and more customised | Closer to the original factory look |
| Best suited to | Styling upgrades and modified cars | Like-for-like accident or fault replacement |
| Pre-order check | Confirm road legality and lamp output requirements | Confirm exact lens pattern and connector |
| Fitment risk | Depends on year, body style, inner/outer sections and original wiring | |
Installation Planning
A professional workshop is recommended when trim removal, wiring diagnosis or water ingress is involved. A careful installation process should include:
- Photograph the original lamp, connector and wire routing before removal.
- Check the new housing, mounting points, gasket and connector for shipping damage.
- Compare the new and original units side by side before connecting power.
- Follow the vehicle service procedure when removing the boot trim and lamp fasteners.
- Seat the gasket evenly so the housing closes against the body without gaps.
- Test the position lights, brake lights, sequential turn signals, reverse lights and rear fog light before reinstalling all trim. Confirm that both turn signals sweep evenly and at the same speed.
- Check the dashboard for warnings and inspect the lamp again after the first wash or rain.
Never force a connector or alter the harness simply because a plug looks similar. A mismatched pin layout can create warning messages or incorrect lamp behaviour.
How the Sequential Turn Signals Work
This Audi A4 B8 smoked tail light assembly includes dynamic sequential turn signals. Instead of the indicator lighting all at once, the signal moves across the lamp in a flowing pattern whenever the turn signal is activated. When the hazard lights are switched on, both sides repeat the sequential effect together. The animation creates a modern Audi-style light signature while making each direction change more noticeable.
Buying for a Workshop or Resale Business
For trade buyers, the first order should verify fitment and finish before larger quantities are stocked. The current product listing supports a minimum order of one set and includes a 12-month warranty against manufacturing defects. Record the SKU, vehicle details and test results from the sample order so repeat purchases can be matched to the same configuration.
View the Audi A4 B8 2013โ2016 smoked tail light assembly, or compare other options in the Audi tail light assembly collection.
Frequently Asked Questions
Will this tail light fit every 2013โ2016 Audi A4?
Do not assume universal fitment. Confirm the body style, production date, original connector, inner and outer lamp sections, and market specification before ordering.
Does this assembly include sequential turn signals?
Yes. The indicator illuminates in a flowing sequence when the turn signal is activated, producing a modern dynamic lighting effect.
Does the assembly require coding?
The current LCS Auto listing states that coding is not required for the listed direct-replacement application. If your car has different wiring or you are changing to a different lighting function, verify this before installation.
Is a smoked tail light legal?
Rules vary by country and region. Confirm that the installed lamp meets local requirements for colour, visibility and light output.
Can I order one set to test?
Yes. The current product page lists a minimum order quantity of one set, which allows a workshop or reseller to verify fitment before a larger order.
Final Recommendation
This smoked Audi A4 B8 tail light assembly is a practical option for a 2013โ2016 car that needs a replacement lamp, a darker rear appearance and sequential turn signals. The most important step is accurate fitment confirmation. Send the VIN, production date, body style and clear connector photos before ordering, then test every rear-light function before final installation.
Leave a Reply